High quality 3D printed Single Shot Loader for BSA CLX air rifles.
UPDATED VERSION with double o-ring that stops pellets falling out of the rear of the loader when inclined. Simply load the .177 pellet from the rear skirt first and the .22 nose first from the front, and the soft o-rings gently but securely hold the pellet in the loader.
Available in .177 and .22
Please select your required calibre, colour and quantity above, before adding to the cart.
Compatible with the following:
BSA Ultra CLX
BSA R12 CLX
The single shot loaders fit perfectly into BSA CLX rifles. They are held in place by a strong N52 neodymium magnet. The single shot loader is just as quick to remove as a normal magazine, so you can switch easily between using the single shot loader or a multishot magazine.
To ensure the highest level of accuracy and prevent any skirt damage, an internal o-ring is used in the pellet chamber. The soft o-ring prevents pellets from falling straight through the front of the pellet chamber whilst allowing the pellet probe to guide the pellet into the breech, causing no damage at all.
Strong magnets ensure the loader closes with a satisfying 'snick' and holds the flip down loader firmly in place.
Every Loader is tested prior to shipping. Orders will normally ship the next working day, on rare occasions it could be up to 3 working days depending on stock levels.
Due to the materials used in the 3D printing process, do not leave the magazines in direct sunlight or extreme hot temperatures such as conservatories or the dashboard of a car for long periods of time or warping may occur.
