High quality 3D printed Single Shot Loader for BSA and Gamo air rifles.
This version has a cutout to allow the indexing arm to move up and down with the single shot loader inserted.
Available in .177 and .22
(Now available in various colours!)
Please select your required calibre and quantity above, before adding to the cart.
Compatible with the following:
BSA Ultra MK1
BSA Scorpion T10
BSA Super 10
BSA R10 Mk1
The single shot loaders fit perfectly into BSA and Gamo rifles. They are held in place by the magazine catch or by the strong magnet in newer BSA and Gamo models and the steel disc mounted in the top plate.
To ensure the highest level of accuracy and prevent any skirt damage, an internal o-ring is used in the pellet chamber. The soft o-ring prevents pellets from falling straight through the pellet chamber whilst allowing the pellet probe to guide the pellet into the breech, causing no damage at all.
Strong magnets ensure the loader closes with a satisfying 'snick' and holds the flip down loader firmly in place.
Every Loader is tested prior to shipping. Orders will normally ship the next working day, on rare occasions it could be up to 3 working days depending on stock levels.
Due to the materials used in the 3D printing process, do not leave the magazines in direct sunlight or extreme hot temperatures such as conservatories or the dashboard of a car for long periods of time or warping may occur.
