High quality 3D printed replacement front sights for the SMK Victory CP2 with optional 1/2” UNF Adapter and Cover. Also fits Artemis PR900 CR600 PP800 and Diana Chaser.
Please select your required type, UNF adapter options and quantity above, before adding to the cart.
Type 1 - Short Smooth Front
This item replaces the original blade front sight if using a scope or other optic and the front sight is not required. The old sight can be tapped off with a small hammer or plastic punch. There is a flat section that lines up with the flat on the barrel, be sure to line this up as it only fits one way. The pictures show before and after, and the look of the rifle is transformed.
Type 2 - Long Smooth front
When using 1/2” UNF adapters you can fit any standard 1/2” UNF moderator but it leaves a gap. This longer front sight replaces the original with a smooth front, for use when using a scope or optic.
This smooth front is slightly longer to remove the gap created when using an M10 to 1/2" UNF adapter. The old sight can be tapped off with a small hammer or plastic punch. There is a flat section that lines up with the flat on the barrel, be sure to line this up as it only fits one way. For comparison, the gap left when using the adapter with the original sight is shown in the pictures.
Type 3 - Long Front Sight
The long front sight is a longer version of the original blade front sight. This is great if using the original open sights, and want to remove the gap created when using a moderator with a 1/2” UNF adapter.
1/2” UNF Adapter Options
1/2” UNF Adapter
1/2” UNF Adapter and Thread Cover
Orders will normally ship the next working day, on rare occasions it could be up to 3 working days depending on stock levels.
Due to the materials used in the 3D printing process, do not leave the magazines in direct sunlight or extreme hot temperatures such as conservatories or the dashboard of a car for long periods of time or warping may occur.
