High quality 3D printed Magazine for the SMK Victory CP2.
Also fits Artemis / SPA / SMK / Zasdar CP1Multi, SR900S, PP800, PR900, PR900W, CR600 & CR600W, CP2 Victory Air Pistol / Rifle, Airforce One Trophy Vermin Multi Shot Pistol, Diana Airbug / Bandit / Chaser / Stormrider / Trailscout, Stoeger XM1
(It won't fit single shot models or the PP750)
Available in .177 (10 shot), .177 (12 shot), .22 (9 Shot) and .22 (10 Shot). Please select your preferred calibre, colour and quantity above before adding to your cart.
This magazine uses a softer spring compared to the original and all pellets are loaded nose first from the top of the magazine. This results in much more accurate shots as the pellet skirts are not damaged as they can be using the original magazine. The .177 (10 shot) holds an extra pellet compared to the original magazine, whilst the .177 (12 shot) holds an extra 3 shots. The .22 holds 2 extra pellets than the original.
The magazine is a perfect fit and cycles all pellets with a super smooth action. It is held in place by a strong neodymium magnet. The bolt is blocked when empty, so you know it's time to reload.
The magazine is taller than the original at 34mm and will prevent the use of the open sights. Please measure from the base of the magazine slot and check it will clear any optics you have attached.
Every magazine is tested prior to shipping. Orders will normally ship the next working day, on rare occasions it could be up to 3 working days depending on stock levels.
Due to the materials used in the 3D printing process, do not leave the magazines in direct sunlight or extreme hot temperatures such as conservatories or the dashboard of a car for long periods of time or warping may occur.
